What goes on the inside of a Scribble card?
The merged message is written on the right-hand inside panel. The inside editor lets you add fixed text around it — a standing line, a signature, a company name — and it draws the reserved message area so nothing gets placed underneath it. Everything on the inside is written in pen, not printed.
On this page
#The two halves
| Panel | Size | What goes there |
|---|---|---|
| Left (inside front) | 108 × 140 mm | Fixed furniture: a standing line, a company name, a small mark. Blank on most cards. |
| Right (inside back) | 108 × 140 mm | The merged message. Reserved — the editor draws the area so you do not place anything under it. |
The pen cannot write right to the edge: 9 mm at the top and bottom of the spread is the machine's grip zone. That leaves a writable band 122 mm tall, and the message box itself is 88 mm wide, with 10 mm of margin each side of the right-hand panel so the handwriting does not start hard against the fold.
#What the inside editor is for
Furniture, not content. Place text, position it, and get out. There is no freehand drawing and no per-card message text, because the message somebody types into a design is not the message that gets written — that comes from the campaign or the rule, merged per recipient.
#How much message fits
The composer in step 4 of the campaign wizard runs the real layout engine over the real geometry as you type, so when the fill meter says 96% it means 96% of the writable area is used. There is no smaller handwriting size that would still be legible, so a message that overflows has to be shortened.
The hard limit is 500 characters, everywhere: the campaign composer and the automation form stop you typing past it, and the API rejects anything longer with message_too_long. In practice a comfortable card is 250 to 400 characters — 500 is the ceiling, not a target, and merge fields only ever make a message longer.
Last checked against the product on . Something wrong or missing? Tell us.